Atwater - Dark Blue / 3XL

A true form-meets-function, fashion-statement piece, the Atwater jacket doesn’t just look the part - it plays the part. Built primarily from hydratex|WindBarrier softshell and offset with contrasting crinkled ripstop fabric on key details, the lightweight and comfortable Atwater jacket feels just as good as it looks - if not better. More than just utilitarian looks With more pocket space than comparable fashion-forward, casually styled motorcycle jackets, and a ventilated windcatcher behind the main zipper, the windblocker-style Atwater jacket doesn’t just look utilitarian - it is. Large zippered stow pockets on the front and an easily accessible bicep-mounted pocket add both practicality and standout style. Similar attention to function-focused details comes from the rib-knit cuffs, providing a flexible fit for added comfort. The story of storage continues inside: a large inner pocket in the lining and a waterproof pocket on the facing offer easy access - even when the jacket is fully zipped. Clear casual cool Beyond its casual cool and everyday convenience, the Atwater jacket is, above all, still a motorcycle jacket - with the protective credentials to prove it. Boasting an AA safety rating and nearly unnoticeable CE-level 1 SEESMART impact protection at the shoulders and elbows, you’re well looked after. And upgrading protection is easy - it’s prepared to accommodate an optional CE-level 2 SEESOFT back protector.

Insulation

• WindBarrier® The REV’IT! WindBarrier® membrane is laminated between two separate layers of fabric: a stretchable outer layer, and a soft fleece inner layer. This combination blocks against wind and helps repel water. Stopping the wind and rain helps prevent hypothermia, and improves a rider’s level of comfort and warmth.

Protection

• Prepared for SEESOFT CE-level 2 Insert Back Protector The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
• SEESMART CE-level 1 Shoulder Protectors SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
• SEESMART CE-level 1 Elbow Protectors SEESMART elbow protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
• Ready for Avertum Tech-Air® airbag system - ONE SIZE UP Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Visibility

• Laminated reflection on back Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Pockets

• Two stash pockets on chest
• Inner waterproof napoleon pocket
• Inner pocket
• Sleeve pocket

Fit

• Regular fit The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.

Ventilation

• Air outlet on upper back
• Direct ventilation at center front Undo the main zipper and open up the center-front direct ventilation panel behind to let in cooling air to stay fresh and focused on warmer days on the bike.

Lining

• 3D mesh
• Mesh

Features

• Short connection zipper The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
• Jeans loop The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
• Comfort collar The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.
• Knitted cuff The knitted cuffs block wind to keep you warm and comfortable.

Outer shell material

• Softshell 3L
• Polyester 1x1 rib
• Polyamide 140D crinkle ripstop Lightweight, crinkled-look ripstop material made from durable polyamide adds character to the design.

Sustainability

• DWR C0 Sustainable water repellent finish
• Vegan
• Outer shell made with recycled polyester
• Lining made with recycled polyester

Materials

• Lining: 74% Polyester (recycled), 17% Polyamide 6, 9% Polyester
• Outer shell: 81% Polyester (recycled), 15% Polyamide 6 (recycled), 4% Polyester